Diskussion:Dvb-apps scan

Aus VDR Wiki
(Unterschied zwischen Versionen)
Wechseln zu: Navigation, Suche
(Nun auch '''HG''' http://linuxtv.org/hg/dvb-apps)
Zeile 6: Zeile 6:
  
 
:so sollte es leichter zu finden sein. gruss [[Benutzer:Wirbel|wirbel]] 18:27, 18. Okt 2005 (CEST)
 
:so sollte es leichter zu finden sein. gruss [[Benutzer:Wirbel|wirbel]] 18:27, 18. Okt 2005 (CEST)
 +
 
----
 
----
  
 
Nun auch '''HG''' http://linuxtv.org/hg/dvb-apps
 
Nun auch '''HG''' http://linuxtv.org/hg/dvb-apps
 +
 +
----
 +
 +
Scheinen auch ein paar Optionen dazu gekommen zu sein.
 +
 +
<pre>
 +
suse:~ # dvbscan
 +
initial tuning data files:
 +
 +
usage: dvbscan [options...] [-c | initial-tuning-data-file]
 +
        atsc/dvbscan doesn't do frequency scans, hence it needs initial
 +
        tuning data for at least one transponder/channel.
 +
        -c      scan on currently tuned transponder only
 +
        -v      verbose (repeat for more)
 +
        -q      quiet (repeat for less)
 +
        -a N    use DVB /dev/dvb/adapterN/
 +
        -f N    use DVB /dev/dvb/adapter?/frontendN
 +
        -d N    use DVB /dev/dvb/adapter?/demuxN
 +
        -s N    use DiSEqC switch position N (DVB-S only)
 +
        -i N    spectral inversion setting (0: off, 1: on, 2: auto [default])
 +
        -n      evaluate NIT-other for full network scan (slow!)
 +
        -5      multiply all filter timeouts by factor 5
 +
                for non-DVB-compliant section repitition rates
 +
        -o fmt  output format: 'zap' (default), 'vdr' or 'pids' (default with -c)
 +
        -x N    Conditional Axcess, (default 1)
 +
                N=0 gets only FTA channels
 +
                N=xxx sets ca field in vdr output to :xxx:
 +
        -t N    Service select, Combined bitfield parameter.
 +
                1 = TV, 2 = Radio, 4 = Other, (default 7)
 +
        -p      for vdr output format: dump provider name
 +
        -e N    VDR version, default 2 for VDR-1.2.x
 +
                ANYTHING ELSE GIVES NONZERO NIT and TID
 +
                Vdr version 1.3.x and up implies -p.
 +
        -l lnb-type (DVB-S Only) (use -l help to print types) or
 +
        -l low[,high[,switch]] in Mhz
 +
        -u      UK DVB-T Freeview channel numbering for VDR
 +
 +
        -P do not use ATSC PSIP tables for scanning
 +
            (but only PAT and PMT) (applies for ATSC only)
 +
        -A N    check for ATSC 1=Terrestrial [default], 2=Cable or 3=both
 +
        -U      Uniquely name unknown services
 +
</pre>
 +
 +
--[[Benutzer:84.186.18.84|84.186.18.84]] 17:30, 14. Apr 2006 (CEST)

Version vom 14. April 2006, 16:30 Uhr

sollte hier auch noch das w_scan zum scannen von dvb-t und dvb-c aufgenommen werden? Macht das scannen etwas leichter.


Sorry gibt es ja schon

so sollte es leichter zu finden sein. gruss wirbel 18:27, 18. Okt 2005 (CEST)

Nun auch HG http://linuxtv.org/hg/dvb-apps


Scheinen auch ein paar Optionen dazu gekommen zu sein.

suse:~ # dvbscan
initial tuning data files:

usage: dvbscan [options...] [-c | initial-tuning-data-file]
        atsc/dvbscan doesn't do frequency scans, hence it needs initial
        tuning data for at least one transponder/channel.
        -c      scan on currently tuned transponder only
        -v      verbose (repeat for more)
        -q      quiet (repeat for less)
        -a N    use DVB /dev/dvb/adapterN/
        -f N    use DVB /dev/dvb/adapter?/frontendN
        -d N    use DVB /dev/dvb/adapter?/demuxN
        -s N    use DiSEqC switch position N (DVB-S only)
        -i N    spectral inversion setting (0: off, 1: on, 2: auto [default])
        -n      evaluate NIT-other for full network scan (slow!)
        -5      multiply all filter timeouts by factor 5
                for non-DVB-compliant section repitition rates
        -o fmt  output format: 'zap' (default), 'vdr' or 'pids' (default with -c)
        -x N    Conditional Axcess, (default 1)
                N=0 gets only FTA channels
                N=xxx sets ca field in vdr output to :xxx:
        -t N    Service select, Combined bitfield parameter.
                1 = TV, 2 = Radio, 4 = Other, (default 7)
        -p      for vdr output format: dump provider name
        -e N    VDR version, default 2 for VDR-1.2.x
                ANYTHING ELSE GIVES NONZERO NIT and TID
                Vdr version 1.3.x and up implies -p.
        -l lnb-type (DVB-S Only) (use -l help to print types) or
        -l low[,high[,switch]] in Mhz
        -u      UK DVB-T Freeview channel numbering for VDR

        -P do not use ATSC PSIP tables for scanning
            (but only PAT and PMT) (applies for ATSC only)
        -A N    check for ATSC 1=Terrestrial [default], 2=Cable or 3=both
        -U      Uniquely name unknown services

--84.186.18.84 17:30, 14. Apr 2006 (CEST)