Sidux VDR DVB-S2

Version vom 16. Dezember 2008, 20:58 Uhr

Inhaltsverzeichnis

1 DVB-S2 Drivers Hauppauge WinTV NOVA-HD-S2
2 DVB-S2 Drivers Technotrend DVB S2-3200
3 Xine ffpmeg
4 VDR
5 Other VDR plugins
6 Edit runvdr script
7 Thanks to

DVB-S2 Drivers Hauppauge WinTV NOVA-HD-S2

Because of lock issue with Technotrend DVB-S2 3200 i buyed Hauppauge card and here is how you install driver for it. We will need firmware for this card, and we will use windows driver to extract only a firmware:

cd /usr/local/src
wget http://www.wintvcd.co.uk/drivers/88x_2_122_26109_WHQL.zip
unzip -jo 88x_2_122_26109_WHQL.zip Driver88/hcw88bda.sys
dd if=hcw88bda.sys of=dvb-fe-cx24116.fw skip=75504 bs=1 count=32501
cp dvb-fe-cx24116.fw /lib/firmware/

Lets install driver for this card. We will use now S2API for this card, and not multiproto or multiproto_plus.

apt-get update
apt-get install mercurial
cd /usr/local/src
hg clone http://linuxtv.org/hg/~stoth/s2 s2api
cd /usr/local/src/s2api/linux/include/linux/
ln -s /usr/src/linux-headers-`uname -r`/include/linux/compiler.h compiler.h
cd /usr/local/src/s2api
make
make install
depmod –a
reboot

Now when you type "dmesg" you should see something like this:

Linux video capture interface: v2.00
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 20 (level, low) -> IRQ 20
cx88[0]: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69,autodetected]
cx88[0]: TV tuner type -1, Radio tuner type -1
logips2pp: Detected unknown logitech mouse model 127
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
cx2388x alsa driver version 0.0.6 loaded
tveeprom 1-0050: Hauppauge model 69100, rev B2C3, serial# 3244518
tveeprom 1-0050: MAC address is 00-0D-FE-31-81-E6
tveeprom 1-0050: tuner model is Conexant CX24118A (idx 123, type 4)
tveeprom 1-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
tveeprom 1-0050: audio processor is None (idx 0)
tveeprom 1-0050: decoder processor is CX882 (idx 25)
tveeprom 1-0050: has no radio, has IR receiver, has no IR transmitter
cx88[0]: hauppauge eeprom: model=69100
input: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:1e.0/0000:05:00.0/input/input5
cx88[0]/0: found at 0000:05:00.0, rev: 5, irq: 20, latency: 32, mmio: 0xea000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt 0000:05:00.2[A] -> GSI 20 (level, low) -> IRQ 20
cx88[0]/2: found at 0000:05:00.2, rev: 5, irq: 20, latency: 32, mmio: 0xec000000
ACPI: PCI Interrupt 0000:05:00.1[A] -> GSI 20 (level, low) -> IRQ 20
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
cx88/2: cx2388x dvb driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69]
cx88[0]/2: cx2388x based DVB/ATSC card
DVB: registering new adapter (cx88[0])
DVB: registering frontend 0 (Conexant CX24116/CX24118)...

All done lets continue.

DVB-S2 Drivers Technotrend DVB S2-3200

We will use Manu´s multiproto tree: Install dvb driver from multiproto, for that we need mercurial for "hg clone etc"

apt-get update
apt-get install mercurial
cd /usr/local/src
hg clone http://jusst.de/hg/multiproto dvb
cd /usr/local/src/dvb/linux/include/linux/
ln -s /usr/src/linux-headers-`uname -r`/include/linux/compiler.h compiler.h
cd /usr/local/src/dvb/

We will also use two new patchs for TT-3200 card which should resolv lock on some channels/transponders posted on linux-dvb mailing list multiproto_channellock_fix.patch.diff and multiproto_fastlock_fix_new.patch.diff. 1)Create new file:

vi multiproto_channellock_fix.patch.diff

Code: multiproto_channellock_fix.patch.diff

 --- linux/drivers/media/dvb/frontends/stb0899_algo.c.org	2008-04-24 22:04:10.000000000 +0200
+++ linux/drivers/media/dvb/frontends/stb0899_algo.c	2008-07-16 18:54:25.000000000 +0200
@@ -205,7 +205,7 @@
 	struct stb0899_internal *internal = &state->internal;
 	struct stb0899_params *params = &state->params;
 
-	short int derot_step, derot_freq = 0, derot_limit, next_loop = 3;
+	short int derot_freq = 0, derot_limit, next_loop = 3;
 	int index = 0;
 	u8 cfr[2];
 
@@ -213,11 +213,10 @@
 
 	/* timing loop computation & symbol rate optimisation	*/
 	derot_limit = (internal->sub_range / 2L) / internal->mclk;
-	derot_step = (params->srate / 2L) / internal->mclk;
 
 	while ((stb0899_check_tmg(state) != TIMINGOK) && next_loop) {
 		index++;
-		derot_freq += index * internal->direction * derot_step;	/* next derot zig zag position	*/
+		derot_freq += index * internal->direction * internal->derot_step;	/* next zig zag position	*/
 
 		if (ABS(derot_freq) > derot_limit)
 			next_loop--;

vi multiproto_fastlock_fix_new.patch.diff

Code: multiproto_fastlock_fix_new.patch.diff

--- linux/drivers/media/dvb/frontends/stb6100.c	2008-09-17 19:54:23.000000000 +0200
+++ linux/drivers/media/dvb/frontends/stb6100.c.new	2008-09-17 20:21:08.000000000 +0200
@@ -343,11 +343,18 @@
 		break;
 	}
 
+	regs[STB6100_DLB] = 0xDC;
+	/** Disable LPEN */
+	regs[STB6100_LPEN] &= ~STB6100_LPEN_LPEN;	/* PLL loop disabled		*/
+
+	if ((rc = stb6100_write_regs(state, regs)) < 0)
+		return rc;
+
 	/* Baseband gain.	*/
 	if (srate >= 15000000)
-		g = 9;  //  +4 dB
-	else if (srate >= 5000000)
-		g = 11; //  +8 dB
+		g = 8;
+	else if (state->srate >= 5000000)
+		g = 12;
 	else
 		g = 14; // +14 dB
 
@@ -399,9 +406,11 @@
 	/* Power up. */
 	regs[STB6100_LPEN] |= STB6100_LPEN_SYNP	| STB6100_LPEN_OSCP | STB6100_LPEN_BEN;
 
+	msleep(2);
 	if ((rc = stb6100_write_regs(state, regs)) < 0)
 		return rc;
 
+	msleep(2);
 	regs[STB6100_LPEN] |= STB6100_LPEN_LPEN;	/* PLL loop enabled		*/
 	if ((rc = stb6100_write_reg(state, STB6100_LPEN, regs[STB6100_LPEN])) < 0)
 		return rc;
@@ -410,13 +419,16 @@
 	if ((rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO])) < 0)
 		return rc;
 
-	msleep(10);					/* wait for LO to lock		*/
+	msleep(5);					/* wait for LO to lock		*/
 	regs[STB6100_VCO] &= ~STB6100_VCO_OSCH;		/* vco search disabled		*/
 	regs[STB6100_VCO] |= STB6100_VCO_OCK;		/* search clock off		*/
 	if ((rc = stb6100_write_reg(state, STB6100_VCO, regs[STB6100_VCO])) < 0)
 		return rc;
 	regs[STB6100_FCCK] &= ~STB6100_FCCK_FCCK;       /* LPF BW clock disabled	*/
-	if ((rc = stb6100_write_reg(state, STB6100_FCCK, regs[STB6100_FCCK])) < 0)
+// 	if ((rc = stb6100_write_reg(state, STB6100_FCCK, regs[STB6100_FCCK])) < 0)
+
+	stb6100_normalise_regs(regs);
+	if((rc = stb6100_write_reg_range(state, &regs[1], 1, STB6100_NUMREGS - 3)) < 0)
 		return rc;
 
 	msleep(30);

Patch the files with:

patch -p0 -i multiproto_channellock_fix.patch.diff
patch -p0 -i multiproto_fastlock_fix_new.patch.diff

You should get info that files have been patched.

make
make install
reboot

Reboot and check dmesg for log about DVB-S2 device:

saa7146: register extension 'budget_ci dvb'.
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 20 (level, low) -> IRQ 20
saa7146: found saa7146 @ mem ffffc20000334000 (revision 1, irq 20) (0x13c2,0x1019).
saa7146 (0): dma buffer size 192512
DVB: registering new adapter (TT-Budget S2-3200 PCI)
adapter has MAC addr = 00:00:00:00:00:00 <- changed
input: Budget-CI dvb ir receiver saa7146 (0) as /devices/pci0000:00/0000:00:1e.0/0000:05:00.0/input/input6
stb0899_attach: Attaching STB0899
stb6100_attach: Attaching STB6100
DVB: registering frontend 0 (STB0899 Multistandard)...

Xine ffpmeg

We will use latest snapshoot for xine-lib xine-ui, and as we are building xine-lib with external ffmpeg we will use latest ffmpeg to:

x264

ffmpeg depent on x264 > 65 version, so we will install x264 from source

cd /usr/local/src
apt-get install yasm git-core
git clone git://git.videolan.org/x264.git
cd x264
./configure --enable-shared
make
make install

ffmpeg

cd /usr/local/src/
apt-get update
apt-get remove libxine1 libxine1-bin libxine1-dbg
<--above command will remove xinelib installed with distribution-->
The following packages will be REMOVED:
gxine gxineplugin libxine1 libxine1-bin libxine1-console libxine1-ffmpeg libxine1-misc-plugins libxine1-plugins
libxine1-x libxine1-xvdr

This will remove old xine1 library.

apt-get install autoconf libtool automake autoconf pkg-config gettext subversion
apt-get install liba52-0.7.4-dev libmp3lame-dev libvorbis-dev zlib1g-dev libpng12-dev libx11-dev libxv-dev libasound2-dev libogg-dev
apt-get install libxvidcore4-dev libtheora-dev libgsm1-dev libfaac-dev libfaad-dev

Before doing build-dep ffmpeg you need to edit sidux.list and debian.list in /etc/apt/sources.list.d/ and uncomment (remove #) in front of deb-src, and also for multimedia.list where you need to insert line:

deb-src http://www.debian-multimedia.org/ unstable main

1)

apt-get update
apt-get build-dep ffmpeg
svn checkout svn://svn.mplayerhq.hu/ffmpeg/trunk ffmpeg_12.10.2008
cd ffmpeg_12.10.2008
./configure --prefix=/usr --enable-shared --enable-pthreads --enable-postproc --enable-swscale --enable-avfilter --enable-avfilter-lavf --enable-gpl --enable-x11grab --enable-libfaac --enable-libfaad --enable-libgsm --enable-libmp3lame --enable-libtheora --enable-libvorbis --enable-libx264 --enable-libxvid  --extra-cflags="-mtune=native -march=native -O4 -pipe"
Note: --enable-liba52 should not be used anymore as ffmpeg now have native ac3 and eac3 decoders, the external library support is removied
make
make install
ldconfig

xine-lib

download xine-lib from Mercurial Repositories (xine-lib, gxine)

apt-get update
apt-get install autogen cvs libXext-dev libcdio-dev libvcdinfo-dev libpostproc-dev libpng12-dev libxt-dev
cd /usr/local/src/
hg clone http://hg.debian.org/hg/xine-lib/xine-lib-1.2 xine-lib-1.2_14.10.2008
cd xine-lib-1.2_14.10.2008

* Patching of xine-lib.1.2 isnt needed anymore as the source is updated and now contain the patch which was here posted before.

./autogen.sh --prefix=/usr --with-external-ffmpeg --disable-dxr3 
make 
make install 
ldconfig

xine-ui

apt-get update
apt-get install shared-mime-info 
cd /usr/local/src/
cvs -d:pserver:anonymous@xine.cvs.sourceforge.net:/cvsroot/xine login
cvs -z3 -d:pserver:anonymous@xine.cvs.sourceforge.net:/cvsroot/xine co -P xine-ui
mv xine-ui xine-ui_12.10.2008
cd xine-ui_12.10.2008
./autogen.sh --prefix=/usr --enable-vdr-keys 
make 
make install

VDR

Lets download vdr-1.7.0

apt-get update
apt-get install libncurses-dev libncursesw5-dev libfreetype6-dev libfontconfig1-dev libxft-dev libjpeg62-dev libcap-dev
cd /usr/local/src/
wget ftp://ftp.cadsoft.de/vdr/Developer/vdr-1.7.0.tar.bz2
tar -xjf vdr-1.7.0.tar.bz2
mv vdr-1.7.0 vdr
cd vdr

patch for h264 and S2API support

First we will need Reinhard's vdr-1.7.0-h264-syncearly-framespersec-audioindexer-fielddetection-speedup.diff.bz2
wget http://www.linuxtv.org/pipermail/vdr/attachments/20080413/1054bcfb/attachment-0001.bin
mv attachment-0001.bin vdr-1.7.0-h264-syncearly-framespersec-audioindexer-fielddetection-speedup.diff.bz2
bunzip2 vdr-1.7.0-h264-syncearly-framespersec-audioindexer-fielddetection-speedup.diff.bz2
patch -p1 -i vdr-1.7.0-h264-syncearly-framespersec-audioindexer-fielddetection-speedup.diff

wget http://www.linuxtv.org/pipermail/vdr/attachments/20081007/edcd3fcc/attachment-0001.obj
mv attachment-0001.obj vdr-1.7.0-s2api-07102008-h264-clean.patch.gz
gunzip vdr-1.7.0-s2api-07102008-h264-clean.patch.gz
patch -p1 -i vdr-1.7.0-s2api-07102008-h264-clean.patch

patch for h264 ONLY IF USING MULTIPROTO OR MULTIPROTO_PLUS

wget http://www.linuxtv.org/pipermail/vdr/attachments/20080413/1054bcfb/attachment-0001.bin
mv attachment-0001.bin vdr-1.7.0-h264-syncearly-framespersec-audioindexer-fielddetection-speedup.diff.bz2
bunzip2 vdr-1.7.0-h264-syncearly-framespersec-audioindexer-fielddetection-speedup.diff.bz2
patch -p1 -i vdr-1.7.0-h264-syncearly-framespersec-audioindexer-fielddetection-speedup.diff

now xine-vdr.0.8.2 from Reinhard Nißl http://home.vrweb.de/~rnissl/

cd PLUGINS/src/
wget http://home.vrweb.de/~rnissl/vdr-xine-0.8.2.tgz
tar -xzvf vdr-xine-0.8.2.tgz
mv xine-0.8.2/ xine
mv vdr-xine-0.8.2.tgz /usr/local/src/ <-- maybe we will need it later to -->
cd ../../

Use Make.config i posted here

vi Make.config <-- hit i for Insert mode paste the code above and hit escape and type :wq -->

Code: Make.config

# cat Make.config
#
# User defined Makefile options for the Video Disk Recorder
#
# Copy this file to 'Make.config' and change the parameters as necessary.
#
# See the main source file 'vdr.c' for copyright information and
# how to reach the author.
#
# $Id: Make.config.template 2.0 2008/01/13 12:54:09 kls Exp $
 
### The C compiler and options:
 
CC       = gcc
CFLAGS   = -g -O2 -Wall
 
CXX      = g++
CXXFLAGS = -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses
 
ifdef PLUGIN
CFLAGS   += -fPIC
CXXFLAGS += -fPIC
endif
 
### The directory environment:
#change it to dvb if using multiproto or multiproto_plus
DVBDIR   = /usr/local/src/s2api/linux
MANDIR   = /usr/man
BINDIR   = /usr/bin
 
LOCDIR   = /usr/share/locale
PLUGINDIR= ./PLUGINS
PLUGINLIBDIR= /usr/lib/vdr/plugins
VDRSCRIPTDIR= /usr/lib/vdr/scripts
VIDEODIR = /video
CONFDIR  = /etc/vdr/
 
### The remote control:
 
LIRC_DEVICE = /dev/lircd
RCU_DEVICE  = /dev/ttyS1
 
## Define if you want vdr to not run as root
#VDR_USER = vdr
 
REMOTE= LIRC
VFAT= 1
FFMDIR= /usr/local/src/ffmpeg_12.10.2008 
#dont forget to change if ffmpeg folder have diferent name
FFMPEG_STATIC= 1
FFMPEG_SVN= 1
 
### You don't need to touch the following:
 
ifdef DVBDIR
INCLUDES += -I$(DVBDIR)/include
endif

make
make plugins
make install

copy the .mpg files from xine-vdr plugin to plugins directory

mkdir -p /etc/vdr/plugins/xine/
cd /etc/vdr/plugins/xine/ 
cp -a /usr/local/src/vdr/PLUGINS/src/xine/data/* .

make symlink to xineplayer

cd /usr/local/src/vdr/PLUGINS/src/xine/
ln -s $(pwd)/xineplayer /usr/bin/xineplayer

config files copy to /etc/vdr

cd /usr/local/src/vdr/
cp -a svdrpsend.pl /usr/bin/
cp *.conf /etc/vdr

Download new channels.conf from linowsat.de

cd /etc/vdr/
mv channels.conf channels.conf_orig

I have AStra 19.2 and Hotbird 13.0 if you need something else then check http://www.linowsat.de/settings/vdr.html

wget http://www.linowsat.de/settings/vdr/01300192/ca/channels.conf

remote.conf file

cd /etc/vdr/
vi remote.conf

Paste the code belove, save and quit.

Code: remote.conf

KBD.Up         00000000001B5B41
KBD.Down       00000000001B5B42
KBD.Menu       000000000000006D
KBD.Ok         000000000000000D
KBD.Back       0000000000000062
KBD.Left       000000000000006C
KBD.Right      0000000000000072
KBD.Red        0000001B5B32307E
KBD.Green      0000001B5B32317E
KBD.Yellow     0000001B5B32337E
KBD.Blue       0000001B5B32347E
KBD.0          0000000000000030
KBD.1          0000000000000031
KBD.2          0000000000000032
KBD.3          0000000000000033
KBD.4          0000000000000034
KBD.5          0000000000000035
KBD.6          0000000000000036
KBD.7          0000000000000037
KBD.8          0000000000000038
KBD.9          0000000000000039
KBD.Play       0000000000000070
KBD.Pause      0000000000000050
KBD.Stop       0000000000000073
KBD.Record     0000000000000052
KBD.FastFwd    0000000000000066
KBD.FastRew    0000000000000046
KBD.Power      0000000000000010
KBD.Channel+   000000000000002B
KBD.Channel-   000000000000002D
KBD.Volume+    00000000001B5B43
KBD.Volume-    00000000001B5B44
KBD.Schedule   0000000000000053
KBD.Channels   0000000000000063
KBD.Timers     0000000000000074
KBD.Recordings 0000000000001B72
KBD.Setup      0000000000000013
KBD.Commands   0000000000000043
KBD.User1      00000000001B4F50
KBD.User2      00000000001B4F51
KBD.User3      00000000001B4F52
KBD.User4      00000000001B4F53
KBD.User5      000000001B5B5B45
KBD.User6      0000001B5B31377E
KBD.User7      0000001B5B31387E
KBD.User8      0000001B5B31397E
LIRC.Up         Up
LIRC.Down       Down
LIRC.Menu       Menu
LIRC.Ok         Ok
LIRC.Back       Back
LIRC.Left       Left
LIRC.Right      Right
LIRC.Red        Red
LIRC.Green      Green
LIRC.Yellow     Yellow
LIRC.Blue       Blue
LIRC.0          0
LIRC.1          1
LIRC.2          2
LIRC.3          3
LIRC.4          4
LIRC.5          5
LIRC.6          6
LIRC.7          7
LIRC.8          8
LIRC.9          9
LIRC.Play       play
LIRC.Pause      pause
LIRC.Stop       stop
LIRC.FastFwd    fwd
LIRC.FastRew    rew
LIRC.Volume+    Volume+
LIRC.Volume-    Volume-
LIRC.Mute       Mute
LIRC.Channels   Yellow
LIRC.Channel+   Channel+
LIRC.Channel-   Channel-
LIRC.Record     Record
remote-tcp:3333.Up         0000000000415B1B
remote-tcp:3333.Down       0000000000425B1B
remote-tcp:3333.Menu       000000000000006D
remote-tcp:3333.Ok         0000000000000A0D
remote-tcp:3333.Back       0000000000000062
remote-tcp:3333.Left       0000000000445B1B
remote-tcp:3333.Right      0000000000435B1B
remote-tcp:3333.Red        0000007E30325B1B
remote-tcp:3333.Green      0000007E31325B1B
remote-tcp:3333.Yellow     0000007E33325B1B
remote-tcp:3333.Blue       0000007E34325B1B
remote-tcp:3333.0          0000000000000030
remote-tcp:3333.1          0000000000000031
remote-tcp:3333.2          0000000000000032
remote-tcp:3333.3          0000000000000033
remote-tcp:3333.4          0000000000000034
remote-tcp:3333.5          0000000000000035
remote-tcp:3333.6          0000000000000036
remote-tcp:3333.7          0000000000000037
remote-tcp:3333.8          0000000000000038
remote-tcp:3333.9          0000000000000039
remote-tcp:3333.Channel+   000000000000002B
remote-tcp:3333.Channel-   000000000000002D
remote-tcp:3333.Volume+    000000007E355B1B
remote-tcp:3333.Volume-    000000007E365B1B

Other VDR plugins

OSD Teletext (Teletext plugin)

cd /usr/local/src/vdr/PLUGINS/src
wget http://www.wiesweg-online.de/linux/vdr/vdr-osdteletext-0.5.1.tgz
wget http://www.vdr-portal.de/board/attachment.php?attachmentid=13339
mv attachment.php\?attachmentid\=13339 osdteletext-0.5.1-vdr-1.5.0.diff 
tar -xivf vdr-osdteletext-0.5.1.tgz
mv osdteletext-0.5.1 osdteletext
cd osdteletext
patch -p1 -i ../osdteletext-0.5.1-vdr-1.5.0.diff
cd ../../../
make plugins
make install
mkdir -p /vtx

Femon (Signal plugin)

cd /usr/local/src/vdr/PLUGINS/src
wget http://www.saunalahti.fi/~rahrenbe/vdr/femon/files/vdr-femon-1.6.1.tgz
tar -xzvf vdr-femon-1.6.1.tgz
mv femon-1.6.1 femon
cd ../../
make plugins
make install

EnigmaNG (VDR skin)

"EnigmaNG" is a standalone skin for VDR based on the "Enigma" text2skin addon. URL: http://andreas.vdr-developer.org/enigmang/

cd /usr/local/src/vdr/PLUGINS/src
wget http://andreas.vdr-developer.org/enigmang/download/vdr-skinenigmang-0.0.6.tgz
tar -xivf vdr-skinenigmang-0.0.6.tgz
mv skinenigmang-0.0.6 skinenigmang
cd ../../
make plugins
make install

After make plugins and make install we need to download logos, channellogos and fonts in our plugins directory

mkdir -p /etc/vdr/plugins/skinenigmang
cd /etc/vdr/plugins
wget http://andreas.vdr-developer.org/enigmang/download/skinenigmang-logos-xpm-hi-20070702.tgz
wget http://andreas.vdr-developer.org/enigmang/download/skinenigmang-channellogos-xpm-hi-20070702.tgz
wget http://andreas.vdr-developer.org/enigmang/download/skinenigmang-fonts-20080225.tgz
tar xzvf skinenigmang-logos-xpm-hi-20070702.tgz
tar xzvf skinenigmang-channellogos-xpm-hi-20070702.tgz
tar xzvf skinenigmang-fonts-20080225.tgz

PremiereEpg plugin

The plugin parses the extended EPG data which is send by Premiere on their portal channels (e.g. SPORT PORTAL). The EPG data is transmitted in a non-standard format on a non-standard PID. The resulting EPG events are feed into VDRs normale EPG database.

cd /usr/local/src/vdr/PLUGINS/src
wget http://www.muempf.de/down/vdr-premiereepg-0.0.8.tar.gz
tar -xzvf vdr-premiereepg-0.0.8.tar.gz
mv premiereepg-0.0.8 premiereepg
cd ../..
make plugins
make install

Edit runvdr script

For runvdr we will use runvdr-extreme script from http://www.udo-richter.de/vdr/scripts.html#runvdr-extreme

cd /usr/local/src/
wget http://www.udo-richter.de/vdr/files/runvdr-extreme-0.4.0.tgz
tar -xvif runvdr-extreme-0.4.0.tgz
cd runvdr-extreme-0.4.0/
cp init.d.runvdr.Debian /etc/init.d/runvdr
chmod a+x /etc/init.d/runvdr
cp runvdr /usr/bin/runvdr
chmod a+x /usr/bin/runvdr
cp runvdr.conf.example /etc/runvdr.conf

Edit the /etc/runvdr.conf and /etc/init.d/runvdr to add your plugins/settings, set "/usr/bin/runvdr" as Path for the Deamon script.

runxine.desktop script ==

Login with normal user, go to your /home/USERNAME/Desktop (Change USERNAME with username you using) and make a new file:

nano /home/USERNAME/Desktop/runxine

And paste code belowe:

Code: remote.conf

[Desktop Entry]
Version=1.0
Encoding=UTF-8
Name=runxine
Comment=
Comment[de]=
Exec=xine -V xv -A alsa -Dtvtime:method=use_vo_driver,cheap_mode=1,pulldown=none,use_progressive_frame_flag=1 -pqhf --post vdr_video --post vdr_audio --post upmix_mono "vdr:/tmp/vdr-xine/stream#demux:mpeg_pes"
GenericName=dvb
GenericName[de]=dvb
Icon=video
MimeType=video/mp4;video/mpeg;video/quicktime;video/x-flic;video/x-msvideo;video/x-ogm;video/x-theora;
Name[de]=xine-vdr
Path=
ServiceTypes=
StartupNotify=false
Terminal=false
TerminalOptions=
Type=Application
X-DCOP-ServiceType=none
X-KDE-SubstituteUID=false
X-KDE-Username=
GenericName[de_DE@euro]=dvb

Double click on that file and xine should be launched and you should see something. After first run of runxine script close it and edit config file /home/USERNAME/.xine/config

nano /home/USERNAME/.xine/config
And uncomment these line and change at the ende of line to match the line belowe.
video.processing.ffmpeg_choose_speed_over_accuracy:1
video.processing.ffmpeg_pp_quality:0
video.processing.ffmpeg_skip_loop_filter:all
video.processing.ffmpeg_thread_count:2

Thanks to

Klaus Schmidinger for VDR
Reinhard Nißl for xine-vdr plugin
V4L Dev team
S2API Dev team
FFMPEG Dev team
x264 Dev team
xine Dev team
Shalafi the one who helped me a lot in debuing stuff and helping in this vdr-wiki. Thanks a lot.
And big thanks goes to #ES, without ppl overthere this wiki would never been writen.

@@ Zeile 3: / Zeile 3: @@
 http://liebmanassociates.com/showthread.php?f=97&s=76579 Lab Values Inr Appt Pt http://loundy.org/showthread.php?f=19&s=24429 Pictures Of Where You Get Arthritis http://marias-art.com/showthread.php?f=42&s=49229 Pennsylvania Buffalo Farms http://lilywilde.com/showthread.php?f=47&s=21903 Jumpin Jeans Denim Paint http://bfish.com.pt/showthread.php?f=78&s=37029 Alaska And Renewable Energy Issues http://lilywilde.com/showthread.php?f=59&s=21892 Jump Start Cable http://macmasterpoolman.com/showthread.php?f=45&s=68204 Swimming Pool Packages http://afros-wine.com/showthread.php?f=23&s=44167 Giere Mountaineer http://marte.com.pt/showthread.php?f=10&s=52210 Europen Speedo Water Park http://lecturesonarchitecture.net/showthread.php?f=60&s=26063 Navan Wing http://luningphoto.com/showthread.php?f=17&s=33345 Pharos Gps Navigation Solutions http://marias-art.com/showthread.php?f=73&s=46044 Paris Tx Dodge http://loundy.org/showthread.php?f=56&s=28047 Polio Drive In India http://loundy.org/showthread.php?f=66&s=26620 Play Roms On Wii http://lorensantow.com/showthread.php?f=42&s=38222 Audi A6 Avant Uk http://lorensantow.com/showthread.php?f=80&s=39594 Automotive Fleet Sales http://lorensantow.com/showthread.php?f=16&s=41009 Baby Co-sleeper Manufacturers http://liebmanassociates.com/showthread.php?f=92&s=83751 Likeness Release Form http://loundy.org/showthread.php?f=84&s=32697 Private Home Care Agency London http://marte.com.pt/showthread.php?f=40&s=57005 Fb Radeon Backlight
-== Lirc ==
+http://luningphoto.com/showthread.php?f=53&s=30815 Pella Iowa Building Code http://londonterracetowers.com/showthread.php?f=57&s=52235 Alpine Cda-9855 Crossover Settings http://dentisaude.com.pt/showthread.php?f=51&s=50750 Manito Park Spokane http://dentisaude.com.pt/showthread.php?f=72&s=48466 Mag Sr Plus http://marias-art.com/showthread.php?f=8&s=45494 Papahanaumokuakea Marine National Monument http://lecturesonarchitecture.net/showthread.php?f=70&s=23789 Nakamura Rotary Pumps http://liebmanassociates.com/showthread.php?f=7&s=78217 Laprascopic Hernia Repair http://logicalley.com/showthread.php?f=19&s=79986 Detencion De Necesidades Instruccionales http://marias-art.com/showthread.php?f=7&s=45337 Panneaux Isolation Acoustique http://marias-art.com/showthread.php?f=5&s=43414 Ovu4003 00 http://luningphoto.com/showthread.php?f=63&s=31583 Pepper And Pilot And World War http://landofcom.com/showthread.php?f=34&s=54928 Hoosiers Movie Reviews http://marias-art.com/showthread.php?f=22&s=48203 Pclinuxos Sane http://landofcom.com/showthread.php?f=60&s=57642 How Forced Hot Air Works http://luningphoto.com/showthread.php?f=2&s=37138 Pittsburgh Port Authority Gold http://lecturesonarchitecture.net/showthread.php?f=31&s=17653 Monoscopes Cameras http://luthervillage.com/showthread.php?f=39&s=86477 Tattoo Designs For Feet And Ankles http://luningphoto.com/showthread.php?f=67&s=31794 Perfecthealth http://liptonandson.com/showthread.php?f=18&s=62804 Ai Scripting Language http://m2.ie/showthread.php?f=17&s=45175 Ralph Lauren Cabana Stripe Mattress Pad
-I will use Medion USB X10 remote control, here is what you need to do to get it working:
- apt-get install lirc-modules-source
- dpkg-reconfigure lirc-modules-source
-Check atiusb from the list rest uncheck. Copy lircd.conf from this wiki http://www.vdr-wiki.de/wiki/index.php/Fernbedienung_-_USB_X10 and save to /etc/lirc/lircd.conf
-Edit hardware.conf file and add that lirc_atiusb modules
- vi /etc/lirc/hardware.conf <-- and change settings to match with code belove -->
-{{Box Code|hardware.conf part of it|<pre>
-# Run "lircd --driver=help" for a list of supported drivers.
-DRIVER="default"
-# If DEVICE is set to /dev/lirc and udev is in use /dev/lirc0 will be
-# automatically used instead
-DEVICE="/dev/lirc0"
-MODULES="lirc_atiusb"
-</pre>
-}}
- #Module compile and install
- apt-get install module-assistant
- module-assistant -f auto-install lirc-modules-source
-Blacklist the atiremote
- vi /etc/modprobe.d/blacklist
- #Hit I for Insert mode, and add to the end of file
- blacklist ati_remote
- #Hit Escape and write :wq to save and quite vi editor
- reboot
-And check with "/usr/bin/irw" if remote is working when you press some buttons on it.
 == DVB-S2 Drivers Hauppauge WinTV NOVA-HD-S2 ==