HDTV Installationsanleitung Ubuntu

Aus VDR Wiki
Wechseln zu: Navigation, Suche

Inhaltsverzeichnis

Gehäuse/Karten Empfehlung

Wer gute Kombinationen hat, bitte posten ...

Asus Pundit4-P5N9300 mit TeVii S470 DVB-S2 PCI-E (~170,- Euro Gehäuse, ~80 Euro DVB-S2)

und nun viel Spaß beim Installieren

--uxtuner

Installationsanleitung Ubuntu 9.04

Nvidia Installation

Achtung: vorher alle nvidia/nv Pakete/Module deinstallieren

apt-get install build-essential xserver-xorg-dev xorg-dev
/etc/init.d/gdm stop
cd /home/deinkonto 
wget ftp://download.nvidia.com/XFree86/Linux-x86/185.19/NVIDIA-Linux-x86-185.19-pkg1.run #(oder neuer)
sh *.run

/etc/X11/xorg.conf

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
EndSection

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Extensions"
    Option         "Composite" "Disable"
EndSection

gdm restarten und anschließend im /var/log/Xorg.0.log prüfen ob der Treiberr wirklich geladen wurde

/etc/init.d/gdm restart

vdpinfo

Mit dem Tool kann man testen ob die vdapu Unterstützung funktioniert

cd /usr/local/src
wget http://www.cs.rug.nl/~wladimir/vdpinfo/vdpinfo-0.0.5.tar.gz
tar -xivf vdpinfo-0.0.5.tar.gz
cd vdpinfo
make
cp vdpinfo /usr/local/bin

LIB Installation

apt-get install mercurial cvs subversion libncurses-dev zlib1g-dev
apt-get install autoconf libtool automake pkg-config gettext unrar
apt-get install liba52-0.7.4-dev libmp3lame-dev libvorbis-dev libpng12-dev libx11-dev libxv-dev libasound2-dev

Treiber Installation

cd /usr/local/src
hg clone http://mercurial.intuxication.org/hg/s2-liplianin/
cd s2-liplianin
cd linux/include/linux
ln -s /usr/src/linux-headers-`uname -r`/include/linux/compiler.h ./
cd ../../../
make
make install
depmod -a
reboot

Firmware Installation (unterschiedlich je nach Karte)

TT-S2-1600

cd /usr/src
hg clone http://powarman.dyndns.org/hg/v4l-dvb
cd v4l-dvb
make
make install

TeVii S470 / TBS 6920 (DVB-S2 PCI-E)

cd /usr/local/src
wget http://www.tbsdtv.com/download/tbs6920_8920_v23_linux_x86_x64.rar
unrar x tbs6920_8920_v23_linux_x86_x64.rar
tar xivf linux-s2api-tbs6920-8920-v23.tar.gz
cd linux-s2api-tbs6920-8920-v23
make
make install

#firmware runterladen von http://www.vdr-portal.de/board/thread.php?threadid=86740
tar xvzf firmware.tar.gz
cp dvb-fe-cx24116.fw /lib/firmware/

Nova-HD-S2

cd /usr/local/src
apt-get install unrar -y
rm /lib/firmware/dvb-fe-c*
cd /usr/local/src
wget http://www.hauppauge.de/software/mce/88x_2_122_26109_WHQL.zip
unzip -jo 88x_2_122_26109_WHQL.zip Driver88/hcw88bda.sys
dd if=hcw88bda.sys of=dvb-fe-cx26109.fw skip=75504 bs=1 count=32501
cp dvb-fe-cx26109.fw /lib/firmware/
ln -s /lib/firmware/dvb-fe-cx26109.fw /lib/firmware/dvb-fe-cx24116.fw

ffmpeg

cd /usr/local/src
apt-get install build-essential checkinstall
apt-get install mercurial cvs subversion git-core libncurses-dev
apt-get install autoconf libtool automake pkg-config gettext
apt-get install liba52-0.7.4-dev libmp3lame-dev libvorbis-dev zlib1g-dev libpng12-dev libx11-dev libxv-dev libxvmc-dev libasound2-dev libmpcdec-dev
apt-get install yasm
apt-get build-dep ffmpeg
git clone git://git.videolan.org/x264.git
cd x264
./configure --prefix=/usr --enable-pic --enable-shared --enable-pthread --enable-asm --extra-cflags="-mtune=native -march=native -mfpmath=sse -O4 -pipe"
make
checkinstall
ldconfig -v
cd /usr/local/src
svn checkout svn://svn.mplayerhq.hu/ffmpeg/trunk ffmpeg
cd ffmpeg/
./configure --prefix=/usr --enable-shared --enable-gpl --enable-postproc --enable-libmp3lame --enable-libvorbis --enable-pthreads --enable-libx264 --extra-cflags="-mtune=native -march=native -mfpmath=sse -O4 -pipe"
make
checkinstall
ldconfig –v

xine plugin

cd /usr/local/src
wget http://home.vr-web.de/~rnissl/vdr-xine-0.9.3.tgz
tar xivf vdr-xine-0.9.3.tgz 


Xine-VDPAU

apt-get remove --purge libxine1 libxine1-bin libxine1-console libxine1-misc-plugins libxine1-x

Achtung! vorher prüfen, ob es in /usr/lib/xine oder /usr/local/lib/xine bereits plugins gibt, ./configure --prefix=/usr ggfs. entsprechend anpassen. Nach der Installation prüfen, ob im lib Verzeichnis die plugins vorhanden sind

cd /usr/local/src
svn co svn://jusst.de/xine-vdpau
cd xine-vdpau 

## vi /usr/local/src/xine-vdpau/src/combined/ffmpeg/ff_video_decoder.c
## "dort gibt es 2 Einträge mit RGBA32 dies ändern in RGB32"

find ../xine-0.9.3 -name xine-lib.patch -exec patch -p1 -i \{} \; 

./autogen.sh
./configure --prefix=/usr
make
make install
ldconfig -v

Xine-UI

cd /usr/local/src
apt-get install libxt-dev libpostproc-dev liblircclient-dev
wget http://home.vrweb.de/~rnissl/xine-ui-cvs-20090617220000.tar.bz2
tar xivf xine-ui-cvs-20090617220000.tar.bz2
cd xine-ui
./autogen.sh --prefix=/usr --enable-vdr-keys
make
checkinstall

Xine Installation prüfen

Bei "Videoausgabe" muß "vdpau" vorhanden sein!

xine --list-plugins

Dies ist xine (X11 gui) - Ein freier Video-Player v0.99.6cvs.
(c) 2000-2007 Das xine Team.

 Verfügbare xine-Plugins:
   -Audioausgabe:
     alsa, oss, esd, file, none.

   -Videoausgabe:
     vdpau, dxr3, aadxr3, xv, raw, SyncFB, opengl, xshm, aa, caca, xxmc, none,
     sdl, vidix, vidixfb, fb, xvmc.

   -Demuxer:
     xvdr, anx, nsv, yuv4mpeg2, mpeg_block, matroska, ogg, pva, iff, mpeg-ts,
     avi, quicktime, wve, idcin, ipmovie, vqa, wc3movie, roq, str, film,
     smjpeg, fourxm, vmd, flashvideo, fli, real, asf, aud, aiff, flac, nsf,
     realaudio, snd, tta, voc, vox, mpeg_pes, slave, mpeg, ac3, dts, cdda, wav,
     mpc, rawdv, vc1es, mp3, shn, yuv_frames, elem, sputext, aac.

   -Eingang:
     CD, VCDO, rtp, DVD, stdin, VDR, pnm, VCD, v4l_radio, v4l_tv, rtsp, FILE,
     DVB, http, tcp, xvdr, mms, pvr.

   -Untertitel:
     dxr3-spudec, spudec, spudvb, spucc, spucmml, sputext.

   -Nachbearbeitung:
     vdr, goom, switch, mosaico, upmix, upmix_mono, stretch, volnorm, warp,
     swscale, expand, fill, invert, eq, denoise3d, boxblur, eq2, unsharp, pp,
     noise, oscope, fftscope, fftgraph, autocrop, tvtime, audiochannel,
     vdr_video, vdr_audio.

   -Audiodecoder:
     gsm610, mad, ffmpegaudio, realadec, vorbis, a/52, nsf, speex, mpc,
     dvaudio, pcm, dts, faad.

   -Videodecoder:
     dxr3-mpeg2, vdpau_mpeg12, vdpau_vc1, mpeg2, realvdec, vdpau_h264,
     ffmpegvideo, theora, bitplane, yuv, rgb, ffmpeg-wmv8, ffmpeg-wmv9.

VDR 1.7.9

cd /usr/local/src
apt-get install libfreetype6-dev libfontconfig1-dev libjpeg62-dev libcap-dev libncurses5-dev libncursesw5-dev libbz2-dev ethtool
wget ftp://ftp.cadsoft.de/vdr/Developer/vdr-1.7.9.tar.bz2
tar xivf vdr-1.7.9.tar.bz2
cd vdr-1.7.9
mv /usr/local/src/xine-0.9.3 PLUGINS/src/xine

Make.config

#
# User defined Makefile options for the Video Disk Recorder
#
# Copy this file to 'Make.config' and change the parameters as necessary.
#
# See the main source file 'vdr.c' for copyright information and
# how to reach the author.
#
# $Id: Make.config.template 2.0 2008/01/13 12:54:09 kls Exp $

### The C compiler and options:

CC       = gcc
CFLAGS   = -g -O2 -Wall

CXX      = g++
CXXFLAGS = -g -O2 -Wall -Woverloaded-virtual -Wno-parentheses

ifdef PLUGIN
CFLAGS   += -fPIC
CXXFLAGS += -fPIC
DEFINES += -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE
endif

### The directory environment:
DVBDIR   = /usr/local/src/s2-liplianin/linux
MANDIR   = /usr/man
BINDIR   = /usr/bin
 
LOCDIR   = /usr/share/locale
PLUGINDIR= ./PLUGINS
PLUGINLIBDIR= /usr/lib/vdr/plugins
VDRSCRIPTDIR= /usr/lib/vdr/scripts
VIDEODIR = /var/lib/video.00
CONFDIR  = /etc/vdr/


### The remote control:

LIRC_DEVICE = /dev/lircd
RCU_DEVICE  = /dev/ttyS1

## Define if you want vdr to not run as root
#VDR_USER = vdr

Vorbereitung:

mkdir /var/lib/video.00
mkdir -p /usr/lib/vdr/plugins
mkdir -p /usr/lib/vdr/scripts
mkdir -p /etc/vdr/plugins
make
make plugins
make i18n
make install
locale-gen de_DE.UTF-8 de_DE
dpkg-reconfigure locales
cp -a svdrpsend.pl /usr/bin
cp *.conf /etc/vdr/

Troubleshooting

Wer Probleme hat in der Art:

dvbdevice.c: In constructor âcDvbDevice::cDvbDevice(int)â:
dvbdevice.c:487: error: âFE_CAN_2G_MODULATIONâ was not declared in this scope
# vi /usr/include/linux/dvb/frontend.h
-    FE_HAS_EXTENDED_CAPS            = 0x800000,   // We need more bitspace for newer APIs, indicate this.
-    FE_NEEDS_BENDING                = 0x20000000, // not supported anymore, don't use (frontend requires frequency bending)
+    FE_HAS_EXTENDED_CAPS            = 0x800000,   // We need more bitspace for newer APIs, indicate this.
+    FE_CAN_2G_MODULATION            = 0x10000000, /* frontend supports "2nd generation modulation" (DVB-S2) */
+    FE_NEEDS_BENDING                = 0x20000000, // not supported anymore, don't use (frontend requires frequency bending)

Xineliboutput plugin

bis vdr-1.7.3

cd /usr/local/src/vdr-1.7.x/PLUGINS/src
wget http://downloads.sourceforge.net/project/xineliboutput/xineliboutput/vdr-xineliboutput-1.0.4/vdr-xineliboutput-1.0.4.tar.bz2
tar xivf vdr-xineliboutput-1.0.4.tar.bz2

mv xineliboutput* xineliboutput
cd ../..
make plugins
make install
cd PLUGINS/src/xineliboutput
make
make install
mkdir -p /etc/vdr/plugins/xineliboutput
cp *.mpg /etc/vdr/plugins/xineliboutput/
cd ../../../
make plugins
make install

ab vdr-1.7.4

cd /usr/local/src/vdr-1.7.9/PLUGINS/src
apt-get install libextractor-dev
cvs -d:pserver:anonymous@xineliboutput.cvs.sourceforge.net:/cvsroot/xineliboutput login
cvs -z3 -d:pserver:anonymous@xineliboutput.cvs.sourceforge.net:/cvsroot/xineliboutput co -P vdr-xineliboutput

mv vdr-xineliboutput* xineliboutput
cd ../..
make plugins
make install
cd PLUGINS/src/xineliboutput
make
make install
mkdir -p /etc/vdr/plugins/xineliboutput
cp *.mpg /etc/vdr/plugins/xineliboutput/
cd ../../../
make plugins
make install

Xine plugin

cd /usr/local/src/vdr-1.7.9/PLUGINS/src/xine/data
mkdir -p /etc/vdr/plugins/xine
cp *.mpg /etc/vdr/plugins/xine

Scripts

/var/bin/runvdr

#!/bin/bash

export VDR_LANG=de_DE
export VDR_CHARSET_OVERRIDE="ISO-8859-15"
export LANG="de_DE"
export LC_COLLATE="de_DE"
export LC_ALL="de_DE"

PATH=/usr/local/bin:$PATH

/usr/bin/amixer set 'IEC958',1 unmute

/usr/bin/touch /var/lib/video.00/.update

VDRPRG="/usr/bin/vdr"
VDRCMD="/usr/bin/vdr -c /etc/vdr -v /var/lib/video.00 -E /var/vdr -l 3 --user=root --lirc=/dev/null \
-s /var/bin/vdrpoweroff -P'xineliboutput -l none -r 37890 -p' -P'xine -r' $*"


KILL="/usr/bin/killall -q -TERM"

# Detect whether the DVB driver is already loaded
# and return 0 if it *is* loaded, 1 if not:
DriverLoaded()
{
  return 1
}

# Load all DVB driver modules needed for your hardware:
LoadDriver ()
{

  return 0

}

# Unload all DVB driver modules loaded in LoadDriver():
UnloadDriver ()
{

  return 0

}

# Load driver if it hasn't been loaded already:
if ! DriverLoaded; then
   LoadDriver
fi

while (true) do
      eval "$VDRCMD"
      if test $? -eq 0 -o $? -eq 2; then exit; fi
      echo "`date` reloading DVB driver"
      $KILL $VDRPRG
      sleep 10
      UnloadDriver
      LoadDriver
      echo "`date` restarting VDR"
done

/var/bin/vdrpoweroff

#!/bin/bash
/sbin/poweroff

/etc/init.d/vdr

#!/bin/bash
### BEGIN INIT INFO
# Provides:          VDR
# Required-Start:    $network
# Required-Stop:     $network
# Default-Start:     3 5
# Default-Stop:      0 1 2 6
# Description:       Start, Stop or Restart VDR
### END INIT INFO

# Shell functions sourced from /etc/rc.status:
# set -e
# Reset status of this service
# rc_reset

#
case "$1" in
    start)
        echo -n "Starting VDR "
                /usr/sbin/ethtool -s eth0 wol g
                /var/bin/runvdr > /var/log/vdr.log &
                /usr/local/bin/switchtv
        ;;
    stop)
        echo -n "Shutting down VDR "
                /usr/local/bin/switchtv kill
        ;;
    restart)
        echo -n "Restart VDR "
        $0 stop
        sleep 5
        $0 start
        ;;
    *)
        echo "Usage: $0 {start|stop|restart}"
        exit 1
        ;;
esac
# rc_exit
exit 0

update-rc.d vdr defaults

/var/bin/vdrwakealarm

#!/bin/sh

DEV=/sys/class/rtc/rtc0/wakealarm

if [ -z "$1" ];then
    wakeuptime=$(/usr/local/bin/svdrpsend.pl -d localhost NEXT abs|grep 250 |cut -f3 -d' '|tr -d '\r')
else
    wakeuptime=$1
fi

echo ""
echo "initialisiere Wakeup ..."
echo 0 > $DEV
echo "setze Timer $wakeuptime ..."
echo $wakeuptime > $DEV
echo ""
echo "naechster Timer abzgl. 2h:"
echo "-------------------------"

ALARM_DATE=$(cat /proc/driver/rtc | grep alrm_date )
ALARM_TIME=$(cat /proc/driver/rtc | grep alrm_time )

echo "$ALARM_DATE"
echo "$ALARM_TIME"
echo ""

TEST=$(echo $ALARM_DATE|grep '\*\*')

if [ -n "$TEST" ];then
     echo "**** ERROR: Wakeup nicht korrekt ... ****"
     echo "****        neuer Wakeup in 4h       ****"
     wakeuptime=$(date +%s)
     wakeuptime=$((wakeuptime+14400))
     $0 $wakeuptime
fi

/usr/local/bin/switchtv

mit Umschaltung zu XBMC

#!/bin/bash
DEFAULT=run_vdrxine

if [ -n "`/bin/pidof switchtv`" ];then
    echo "switchtv already running ..."
    exit 0
fi

run_vdr() {
    $DEFAULT
}

run_vdrxineliboutput() {
    /usr/bin/xinit -e /usr/bin/vdr-sxfe --video=vdpau --post tvtime:method=use_vo_driver --audio=alsa --fullscreen --reconnect $@ &
}

run_vdrxine() {
    /usr/bin/xinit -e /usr/bin/xine -I -V vdpau -f -r anamorphic  --post vdr_video --post vdr_audio --post upmix_mono --post vdr --verbose=2 vdr:/tmp/vdr-xine/stream#demux:mpeg_pes &
}

run_xbmc() {
    if [ -f /usr/share/xbmc/xbmc.bin ];then
         /usr/local/bin/scanvdr &
         /usr/bin/xinit -e /usr/share/xbmc/xbmc.bin -fs $@ &
    else
         /etc/init.d/vdr restart
    fi
}

kill_apps() {
     killall -w -9 vdr-sxfe 2>/dev/null
     killall -w -9 xterm    2>/dev/null
     killall -w -9 runvdr   2>/dev/null
     killall -w -9 vdr      2>/dev/null
     killall -w -9 xine     2>/dev/null
     killall -w -9 xbmc     2>/dev/null
     killall -w -9 xbmc.bin 2>/dev/null
     killall -w -9 scanvdr  2>/dev/null
     killall -w -9 irexec   2>/dev/null
     killall -w -9 xinit    2>/dev/null
}

if [ "$1" = "xbmc" ];then
     kill_apps
     /usr/bin/irexec -d /etc/irexec.conf
     run_xbmc
elif [ "$1" = "vdr" ];then
     kill_apps
     /usr/bin/irexec -d /etc/irexec.conf
     /etc/init.d/vdr start
elif [ "$1" = "kill" ];then
     kill_apps
elif [ -z "$1" ];then
     killall -9 irexec   2>/dev/null
     run_vdr
     /usr/bin/irexec -d /etc/irexec.conf
fi

exit 0

Script permissions anpassen

chmod 755 /usr/local/bin/switchtv
chmod 755 /etc/init.d/vdr
chmod 755 /var/bin/runvdr
chmod 755 /var/bin/vdrpoweroff
chmod 775 /var/bin/wakealarm

Wakeup

Wenn das Wakeup nicht funktioniert, dann bitte http://www.mythtv.org/wiki/ACPI_Wakeup#Disable_hwclock_updates lesen

X

/etc/init.d/gdm disablen:

update-rc.d gdm remove

/etc/X11/Xwrapper.config

Diese Zeile

allowed_users=console

ändern in

allowed_users=anybody

/etc/X11/xorg.conf

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder63)  Fri Apr  3 13:01:52 PST 2009


Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"

#    VendorName     "Unknown"
#    ModelName      "Unknown"
    Identifier     "Monitor0"
    #HorizSync       15.0 - 68.0
    HorizSync       15.0 - 75.0
    VertRefresh     23.0 - 61.0
    Option         "DPMS"
    Option         "ExactModeTimingsDVI" "True"
    Option         "UseDisplayDevice" "DFP-0"
    Option         "UseEDIDFreqs" "False"

    # 1920x1080p @ 50Hz (EIA/CEA-861B)
    ModeLine "1920x1080@50" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync

    # 1920x1080p @ 60Hz (EIA/CEA-861B)
    ModeLine "1920x1080@60" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync

    # 1920x1080p @ 24Hz (EIA/CEA-861B)
    ModeLine "1920x1080@24" 74.250 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync

    # 1920x1080p @ 23.976Hz (EIA/CEA-861B)
    ModeLine "1920x1080@23.976" 74.175 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync

    # 1920x1080i @ 50Hz (EIA/CEA-861B)
    Modeline "1920x1080@50i" 74.250 1920 2448 2492 2640 1080 1085 1095 1125 +hsync +vsync Interlace

    # 1920x1080i @ 60Hz (EIA/CEA-861B)
    Modeline "1920x1080@60i" 74.250 1920 2008 2052 2200 1080 1085 1095 1125 +hsync +vsync Interlace

    # 1920x1080p @ 59.94Hz (EIA/CEA-861B)
    ModeLine "1920x1080@59.94" 148.350 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync

    # 1920x1080i @ 59.94Hz (EIA/CEA-861B)
    Modeline "1920x1080@59.94i" 74.175 1920 2008 2052 2200 1080 1085 1095 1125 +hsync +vsync Interlace

    # 1920x1080p @ 25Hz (EIA/CEA-861B)
    ModeLine "1920x1080@25" 74.250 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync

    # 1920x1080p @ 29.97Hz (EIA/CEA-861B)
    ModeLine "1920x1080@29.97" 74.175 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync

    # 1920x1080p @ 30Hz (EIA/CEA-861B)
    ModeLine "1920x1080@30" 74.250 1920 2008 2052 2200 1080 1084 1089 1125 +hsync
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    Option         "CustomEdid" "DFP-0:/etc/X11/edid.bin"
    Option         "ConnectedMonitor" "DFP-0"
    Option         "UseDisplayDevice" "DFP-0"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "NoLogo"
    Option         "DynamicTwinView" "false"
    Option         "AllowGLXWithComposite" "True"
    Option         "AddARGBVisuals" "True"
    Option         "AddARGBGLXVisuals" "True"
    Option         "NoLogo" "False"
    Option         "RenderAccel" "True"
    Option         "UseEvents" "True"
    Option         "TripleBuffer" "True"
    Option         "ExactModeTimingsDVI" "True"
    Option         "FlatPanelProperties" "Scaling = Native"
    SubSection     "Display"
        Depth       24
        Modes      "1920x1080@50" "1920x1080@24"
    EndSubSection
EndSection

Section "Extensions"
    Option         "Composite" "Disable"
EndSection

Section "Module"
    Load           "extmod"
    Load           "glx"
    #Load           "v4l"
EndSection

Lirc

apt-get install lirc lirc-modules-source

/etc/lirc/hardware.conf

(nur für Nova-HD-S2 IR Empfänger!)

# /etc/lirc/hardware.conf
#
#Chosen Remote Control
REMOTE="Hauppauge Nova-HD-S2"
REMOTE_MODULES=""
REMOTE_DRIVER="devinput"
TEMPIREVENT=`ls /dev/input/by-path/ |grep event-ir`
REMOTE_DEVICE="/dev/input/by-path/$TEMPIREVENT"
REMOTE_LIRCD_CONF="/etc/lircd.conf"
REMOTE_LIRCD_ARGS=""

#Chosen IR Transmitter
TRANSMITTER="None"
TRANSMITTER_MODULES=""
TRANSMITTER_DRIVER=""
TRANSMITTER_DEVICE=""
TRANSMITTER_LIRCD_CONF=""
TRANSMITTER_LIRCD_ARGS=""

#Enable lircd
START_LIRCD="true"

#Don't start lircmd even if there seems to be a good config file
#START_LIRCMD="false"

#Try to load appropriate kernel modules
LOAD_MODULES=""

# Default configuration files for your hardware if any
LIRCMD_CONF=""

#Forcing noninteractive reconfiguration
#If lirc is to be reconfigured by an external application
#that doesn't have a debconf frontend available, the noninteractive
#frontend can be invoked and set to parse REMOTE and TRANSMITTER
#It will then populate all other variables without any user input
#If you would like to configure lirc via standard methods, be sure
#to leave this set to "false"
FORCE_NONINTERACTIVE_RECONFIGURATION="false"
START_LIRCMD=""

/etc/lircd.conf

(nur für Nova-HD-S2 IR Empfänger!)

# Please make this file available to others
# by sending it to <lirc@bartelmus.de>
#
# this config file was automatically generated
# using lirc-0.8.4a(default) on Sun Aug 30 19:33:29 2009
#
# contributed by
#
# brand:                       ./test
# model no. of remote control:
# devices being controlled by this remote:
#

begin remote

  name  Nova-HD-S2
  bits           13
  flags RC5|CONST_LENGTH
  eps            30
  aeps          100

  one           915   854
  zero          915   854
  plead         951
  gap          112860
  toggle_bit_mask 0x800

      begin codes
          OK                       0x17A5
          Left                     0x1796
          Right                    0x1797
          Up                       0x1794
          Down                     0x1795
          Power                    0x17BD
          Go                       0x17BB
          TV                       0x179C
          Videos                   0x1798
          Music                    0x1799
          Pictures                 0x179A
          Guide                    0x179B
          Radio                    0x178C
          Back                     0x179F
          Menu                     0x178D
          Volume+                  0x1790
          Volume-                  0x1791
          Ch+                      0x17A0
          Ch-                      0x17A1
          Mute                     0x178F
          PrevCh                   0x1792
          Pause                    0x17B0
          Play                     0x17B5
          Stop                     0x17B6
          Next                     0x179E
          Prev                     0x17A4
          Forward                  0x17B4
          Rewind                   0x17B2
          0                        0x1780
          1                        0x1781
          2                        0x1782
          3                        0x1783
          4                        0x1784
          5                        0x1785
          6                        0x1786
          7                        0x1787
          8                        0x1788
          9                        0x1789
          Red                      0x178B
          Green                    0x17AE
          Yellow                   0x17B8
          Blue                     0x17A9
          *                        0x178A
          #                        0x178E
      end codes

end remote

/etc/irexec.conf

begin
   prog   = irexec
   remote = NOVA-HD-S2
   button = Go
   config = /usr/local/bin/switchtv xbmc & \n
end
begin
   prog   = irexec
   remote = NOVA-HD-S2
   button = TV
   config = /usr/local/bin/switchtv vdr & \n
end

/etc/vdr/remote.conf

LIRC.Info      Guide
LIRC.Audio     Music
LIRC.Pause     Pause
LIRC.Play      Play
LIRC.Stop      Stop
LIRC.Next      Next
LIRC.Prev      Prev
LIRC.FastFwd   Forward
LIRC.FastRew   Rewind
LIRC.Schedule  Pictures
LIRC.Recordings Videos
LIRC.0         PrevCh
LIRC.Up        Up
LIRC.Down      Down
LIRC.Menu      Menu
LIRC.Ok        OK
LIRC.Back      Back
LIRC.Left      Left
LIRC.Right     Right
LIRC.Red       Red
LIRC.Green     Green
LIRC.Yellow    Yellow
LIRC.Blue      Blue
LIRC.0         0
LIRC.1         1
LIRC.2         2
LIRC.3         3
LIRC.4         4
LIRC.5         5
LIRC.6         6
LIRC.7         7
LIRC.8         8
LIRC.9         9
LIRC.Power     Power
LIRC.Volume+   Volume+
LIRC.Volume-   Volume-
LIRC.Mute      Mute
LIRC.Channel+  Ch+
LIRC.Channel-  Ch-

Audio

Vorsichthalber auf die neueste Alsa Version mit dem Script "AlsaUpgrade-1.0.x-rev-1.17.sh" von hier upgraden und anschließend neu booten

Der User der vdr-sxfe startet muß(!) in der group "audio" sein

mit aplay sieht man wo das Device (hier am Beispiel HDMI) konfiguriert ist (Card "0" Device "3")

aplay -l 
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC883 Analog [ALC883 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 3: NVIDIA HDMI [NVIDIA HDMI]
  Subdevices: 0/1
  Subdevice #0: subdevice #0

/etc/asound.conf

pcm.!default {
        type hw
        card 0
        device 3
}

/etc/vdr/setup.conf (vdr muß vorher gestoppt sein)

xineliboutput.Audio.Port = hw:0,3
xineliboutput.Audio.Speakers = Pass Through

~/.xine/config_xineliboutput

audio.device.alsa_front_device:default
audio.device.alsa_passthrough_device:hw:0,3
audio.device.alsa_surround51_device:default
audio.output.speaker_arrangement:Pass Through
audio.synchronization.av_sync_method:resample
audio.synchronization.force_rate:48000
audio.synchronization.resample_mode:on

Feintuning

~/.xine/config

# Anzahl der Audiopuffer
# numeric, default: 230
engine.buffers.audio_num_buffers:250

# Anzahl der Videopuffer
# numeric, default: 500
engine.buffers.video_num_buffers:1000
engine.buffers.video_num_frames:22

XBMC

/etc/apt/sources.list.d/xbmc.list

deb http://ppa.launchpad.net/team-xbmc-svn/ppa/ubuntu jaunty main
deb-src http://ppa.launchpad.net/team-xbmc-svn/ppa/ubuntu jaunty main

Installation

apt-get update
apt-get install xbmc

advancedsettings.xml (~/.xbmc/userdata)

<advancedsettings>
        <moviestacking action="prepend">
                <regexp>custom[0-9]*</regexp>
        </moviestacking>
</advancedsettings>

Lircmap.xml (~/.xbmc/userdata)

<lircmap>
  <remote device="Nova-HD-S2">
         <power>Power</power>
         <info>Red</info>
         <display>Green</display>
         <title>Yellow</title>
         <start>Blue</start>
         <skipplus>SkipFwd</skipplus>
         <skipminus>SkipBack</skipminus>
         <channelplus>Ch+</channelplus>
         <channelminus>Ch-</channelminus>
         <skipplus>Next</skipplus>
         <skipminus>Prev</skipminus>
         <mymusic>Music</mymusic>
         <mypictures>Pictures</mypictures>
         <myTV>TV</myTV>
         <myvideo>Videos</myvideo>
         <up>Up</up>
         <left>Left</left>
         <right>Right</right>
         <down>Down</down>
         <up>Up</up>
         <select>OK</select>
         <menu>Menu</menu>
         <play>Play</play>
         <pause>Pause</pause>
         <stop>Stop</stop>
         <forward>FastFwd</forward>
         <reverse>FastRew</reverse>
         <back>Back</back>
         <zero>0</zero>
         <one>1</one>
         <two>2</two>
         <three>3</three>
         <four>4</four>
         <five>5</five>
         <six>6</six>
         <seven>7</seven>
         <eight>8</eight>
         <nine>9</nine>
  </remote>
</lircmap>

/usr/local/bin/scanvdr

#!/bin/bash

VDR2JPEG="/usr/local/bin/vdr2jpeg"
FFMPEG="/usr/bin/ffmpeg"
IMGUSE="VDR2JPEG"

VDRREC="/nas01/videos/vdr"  # you may need to adjust this
TVFILE="../tvshow.nfo"
NFOFILE="001.nfo"

DVDTHUMB="../folder.jpg"
DVDOFFSETVDR="18000"
DVDOFFSETSEC="5000"
DVD_XRES="144"
DVD_YRES="176"

FANTHUMB="../fanart.jpg"
FANOFFSETVDR="20000"
FANOFFSETSEC="6000"
FAN_XRES="1280"
FAN_YRES="720"

CHECKRUNNING=$(/bin/pidof -x $0|wc -w)

if [ $CHECKRUNNING -gt 2 ];then
  echo "$CHECKRUNNING"
  echo "scanvdr already running ..."
  exit 0
fi

if [ "$1" = "-new" ];then
  echo "regenerating all files ..."
  find $VDRREC -name "*.jpg" -exec rm {} \;
  find $VDRREC -name "*.nfo" -exec rm {} \;
elif [ -n "$1" ];then
  echo "  Usage:"
  echo "  $0"
  echo "      - or -"
  echo "  $0 -new"
  exit 0
fi


for i in $(find $VDRREC -name "info*" -type f)
do
  VDRDIR=$(dirname $i)
  VDRINFO=$(basename $i)
  cd $VDRDIR

  if [ -f $VDRINFO ];then
     AIRED=$(basename $VDRDIR | awk -F'.' '{print $1}')
     DAUER=$(grep "^E " $VDRINFO | awk '{print $4/60}' | awk -F'.' '{print $1}')
     TITEL=$(grep "^T " $VDRINFO | sed "s/^T //")
     INHALT=$(grep "^D " $VDRINFO | sed "s/^D //")
     KURZTEXT=$(grep "^S " $VDRINFO | sed "s/^S //")
     if [ -z "$KURZTEXT" ];then
          KURZTEXT="$TITEL"
     fi
  fi

  echo "${TITEL}:"

  echo "creating database infos ..."

  COUNTREC=$(find .. -name "*.rec" | wc -l)
  COUNTRECTS=$(find .. -name "*.ts" | wc -l)
  let COUNTREC=COUNTREC+COUNTRECTS

  HTEXT=$(find .. -name $VDRINFO | sort -n | xargs cat | grep "^S " | sed "s/^S //")

  if [ -z "$HTEXT" ];then
        HTEXT="$DAUER min: $INHALT"
  elif [ "$COUNTREC" = "1" ];then
        HTEXT="[ ${HTEXT} ]
$DAUER min: $INHALT"
  fi

  echo "<tvshow>"                  > $TVFILE
  echo "<title>$TITEL</title>"    >> $TVFILE
  echo "<plot>$HTEXT</plot>"      >> $TVFILE
  echo "</tvshow>"                >> $TVFILE


  if [ ! -f $NFOFILE ];then

     echo "<episodedetails>"                     > $NFOFILE
     echo "<title>$KURZTEXT</title>"            >> $NFOFILE
     echo "<rating></rating>"                   >> $NFOFILE
     echo "<season></season>"                   >> $NFOFILE
     echo "<episode></episode>"                 >> $NFOFILE
     echo "<plot>$DAUER min: $INHALT</plot>"    >> $NFOFILE
     echo "<credits>VDR</credits>"              >> $NFOFILE
     echo "<director></director>"               >> $NFOFILE
     echo "<aired>$AIRED</aired>"               >> $NFOFILE
     echo "<runtime>$DAUER min</runtime>"       >> $NFOFILE
     echo "<actor></actor>"                     >> $NFOFILE
     echo "</episodedetails>"                   >> $NFOFILE

  fi

  if [ "$VDRINFO" = "info.vdr" ];then
       VIDEOFILE="001.vdr"
  else
       VIDEOFILE="00001.ts"
  fi

  if [ -f $VDR2JPEG ] && [ "$IMGUSE" = "VDR2JPEG" ] && [ "$VDRINFO" = "info.vdr" ];then

     if [ ! -f $DVDTHUMB ];then
       echo "creating DVD thumbnails ..."
       $VDR2JPEG -x $DVD_XRES= -y $DVD_YRES -f $DVDOFFSETVDR -r .
       mv 000${DVDOFFSETVDR}.jpg $DVDTHUMB
     fi

     if [ ! -f $FANTHUMB ];then
       echo "creating FANART thumbnails ..."
       $VDR2JPEG -x $FAN_XRES= -y $FAN_YRES -f $FANOFFSETVDR -r .
       mv 000${FANOFFSETVDR}.jpg $FANTHUMB
     fi

  elif [ -f $FFMPEG ];then

     if [ ! -f $DVDTHUMB ];then
       echo "creating DVD thumbnails ..."
       $FFMPEG -i $VIDEOFILE -itsoffset $DVDOFFSETSEC -s ${DVD_XRES}x${DVD_YRES} -f image2 -vframes 1 -y temp.jpg
       mv temp.jpg $DVDTHUMB
     fi

     if [ ! -f $FANTHUMB ];then
       echo "creating FANART thumbnails ..."
       $FFMPEG -i $VIDEOFILE -itsoffset $FANOFFSETSEC -s ${FAN_XRES}x${FAN_YRES} -f image2 -vframes 1 -y temp.jpg
       mv temp.jpg $FANTHUMB
     fi

  fi

  echo "---"

done