Master-timer

Aus VDR Wiki
(Unterschied zwischen Versionen)
Wechseln zu: Navigation, Suche
(Links)
K (Änderungen von 82.184.99.35 (Diskussion) rückgängig gemacht und letzte Version von Hulk wiederhergestellt)
 
(8 dazwischenliegende Versionen von 8 Benutzern werden nicht angezeigt)
Zeile 1: Zeile 1:
 
==Beschreibung==
 
==Beschreibung==
 +
Master-Timer is a system for automatic recording of series and movies.
 +
Upon start the configuration files are read. Then, depending on configuration
 +
the "epg.data" in the current directory is used or the EPG-data is requested
 +
with the "LSTE"-command directly from VDR. After that matching entries are
 +
looked for and then programmed via SVDR into VDR. That's about it.
 +
 +
It is advisable to create a Cronjob for periodic execution of "run-mt.pl"
 +
 
==Softwareanforderungen==
 
==Softwareanforderungen==
 +
VDR
 +
 
==Installation==
 
==Installation==
 +
If you have a version of Master-Timer before 0.7.0 installed you should remove
 +
the old files before copying the new. Otherwise the procedure will be most likely
 +
none-working.
 +
 +
For the examples you have to in the path of the extracted archive
 +
 +
> cd <path to extracted archive>
 +
 +
Master-Timer uses the directory "$HOME/.master-timer" or "/etc/master-timer"
 +
to there it's configuration-files and to store some additional data-files.
 +
A sample configuration is included in the sample-directory inside the
 +
distribution-archive.
 +
 +
> mkdir /etc/master-timer
 +
> cp sample/* /etc/master-timer
 +
or.
 +
> mkdir ~/.master-timer
 +
> cp sample/* ~/.master-timer
 +
 +
After that you have to place the program-files ("*.pl") somewhere in you path.
 +
e.g. /usr/local/bin
 +
From the path where you extracted the archive:
 +
> cp -d /*.pl lib parts /usr/local/bin
 +
The parameter "-a" is important to preserve the symlinks
 +
 +
Now it's the time to make yourself comfortable with the configuration files.
 +
Especially "config" and "torecord". All (sample/)configuration files include
 +
comments for understanding you can and have to do.
 +
 +
 +
 +
==Starten von Master-Timer==
 +
Just run "run-mt.pl"
 +
 +
For cyclic starting you can create a Cronjob.
 +
Here is an example for the /etc/crontab
 +
Instead of "root" you may have to specify the user under which the script shall
 +
be started.
 +
- snip -
 +
0 6    * * *  root    /usr/local/bin/run-mt.pl
 +
- snip -
 +
This entry would start run-mt.pl every day at 6 o'clock.
 +
 +
 +
 +
 
==Konfiguration==
 
==Konfiguration==
  
 
==Links==
 
==Links==
{|
+
# [http://mt.citd.de Homepage]
| [1]
+
# [http://www.hubertus-sandmann.homepage.t-online.de/vdr_addons.htm#master-timer Beschreibung]
| http://mt.citd.de
+
 
| Homepage master-timer
+
[[Kategorie:Timer und Co]]
|-
+
[[Kategorie:Skripte]]
| [2]
+
| http://www.hubertus-sandmann.homepage.t-online.de/vdr_addons.htm#master-timer
+
| Beschreibung
+
|}[[Kategorie:Timer und Co]]
+

Aktuelle Version vom 30. November 2009, 06:02 Uhr

Inhaltsverzeichnis

[Bearbeiten] Beschreibung

Master-Timer is a system for automatic recording of series and movies. Upon start the configuration files are read. Then, depending on configuration the "epg.data" in the current directory is used or the EPG-data is requested with the "LSTE"-command directly from VDR. After that matching entries are looked for and then programmed via SVDR into VDR. That's about it.

It is advisable to create a Cronjob for periodic execution of "run-mt.pl"

[Bearbeiten] Softwareanforderungen

VDR

[Bearbeiten] Installation

If you have a version of Master-Timer before 0.7.0 installed you should remove the old files before copying the new. Otherwise the procedure will be most likely none-working.

For the examples you have to in the path of the extracted archive

> cd <path to extracted archive>

Master-Timer uses the directory "$HOME/.master-timer" or "/etc/master-timer" to there it's configuration-files and to store some additional data-files. A sample configuration is included in the sample-directory inside the distribution-archive.

> mkdir /etc/master-timer > cp sample/* /etc/master-timer or. > mkdir ~/.master-timer > cp sample/* ~/.master-timer

After that you have to place the program-files ("*.pl") somewhere in you path. e.g. /usr/local/bin From the path where you extracted the archive: > cp -d /*.pl lib parts /usr/local/bin The parameter "-a" is important to preserve the symlinks

Now it's the time to make yourself comfortable with the configuration files. Especially "config" and "torecord". All (sample/)configuration files include comments for understanding you can and have to do.


[Bearbeiten] Starten von Master-Timer

Just run "run-mt.pl"

For cyclic starting you can create a Cronjob. Here is an example for the /etc/crontab Instead of "root" you may have to specify the user under which the script shall be started. - snip - 0 6 * * * root /usr/local/bin/run-mt.pl - snip - This entry would start run-mt.pl every day at 6 o'clock.



[Bearbeiten] Konfiguration

[Bearbeiten] Links

  1. Homepage
  2. Beschreibung