Rwrapper.sh

Aus VDR Wiki
(Unterschied zwischen Versionen)
Wechseln zu: Navigation, Suche
(→‎rwrapper.sh)
 
(37 dazwischenliegende Versionen von 18 Benutzern werden nicht angezeigt)
Zeile 1: Zeile 1:
−
  RECORD_CNF="/etc/vdr/[[record.conf]]"
+
Vorschlag für ein einfaches ''Wrapper''-Skript, welches ''vor / nach / editieren'' einer Aufnahme ausgeführt werden kann.
  
 +
==Übergabe==
 +
-r [[Struktur|$PATH]]/rwrapper.sh
 +
--record=[[Struktur|$PATH]]/rwrapper.sh
 +
 +
Siehe auch [[VDR Optionen]].
 +
 +
==rwrapper.sh==
 +
{{Box Datei | [[Struktur|$PATH]]/rwrapper.sh |
 
<pre>
 
<pre>
 
#!/bin/sh
 
#!/bin/sh
 
#
 
#
−
# rwrapper.sh - v.0.2
+
# rwrapper.sh
 
#
 
#
 
# an example script for use with the '-r' option could look like this:
 
# an example script for use with the '-r' option could look like this:
−
#
 
−
# history
 
−
# --------
 
−
# 20041207,ronny: added record.conf
 
  
−
# CONFIG START
+
CLIPINC="0"    # (0=off,1=on)
−
  RECORD_CNF="/etc/vdr/record.conf"
+
NOAD="0"       # (0=off,1=on,2=online mode)
−
# CONFIG END
+
SHAREMARKS="0"  # (0=off,1=on,2=upload after cut)
 +
AUTOCUTTER="0"  # (0=off,1=on,2=manual edit)
  
−
PATH=$PATH:/usr/local/bin
+
# set the noad online-mode here
 +
# 1 means online for live-recording only
 +
# 2 means online for every recording
 +
ONLINEMODE="--online=1"
 +
 
 +
# set additional noad args for every call here here (not used by AutoCutter, see README)
 +
ADDOPTS="--ac3 --overlap --jumplogo --comments --statisticfile=/var/log/noadstat"
 +
 
 +
# AutoCutter Options - see AutoCutter README/INSTALL for more
 +
ACBINDIR=/usr/local/vdr/bin
 +
NOADQ=/var/spool/vdrconvert/noad
 +
AUTOCUTLOG=/var/log/autocutter.log
 +
 
 +
case $1 in
 +
    before)
 +
echo "Before recording $2"
 +
 
 +
############
 +
# clipinc
 +
############
 +
case $CLIPINC in
 +
    1) vdrrecinfo.pl $1 "$2"
 +
;;
 +
esac
 +
 
 +
############
 +
# noad
 +
############
 +
case $NOAD in
 +
    2) noad $1 $ADDOPTS $ONLINEMODE "$2"
 +
;;
 +
esac
  
−
case "${1}" in
 
−
    before|after|edited)
 
−
echo "${1} recording ${2}"
 
−
VAR=`echo ${1:0:1}|tr a-z A-Z`
 
−
sed "/^${VAR}/!d;s/^[A-Z]://" "${RECORD_CNF}" |
 
−
while read i ; do
 
−
    eval ${i}
 
−
done
 
 
;;
 
;;
−
    *)
+
    after)
−
echo "ERROR: unknown state: ${2}"
+
echo "After recording $2"
 +
 
 +
        ############
 +
        # noad
 +
        ############
 +
        case $NOAD in
 +
            1) noad $1 $ADDOPTS "$2"
 +
                ;;
 +
            2) noad $1 $ADDOPTS $ONLINEMODE "$2"
 +
                ;;
 +
        esac
 +
 
 +
        ############
 +
        # AutoCutter
 +
        ############
 +
        case $AUTOCUTTER in
 +
            1|2) grep -q "$2" $NOADQ 2>/dev/null
 +
                if [ $? -ne 0 ]; then
 +
                  printf "%s " "$2" >>$NOADQ
 +
                  # Start NoAD Scan in 7 min.
 +
                  echo "printf '\n' >>$NOADQ" | at now+7 min
 +
                fi
 +
              ;;
 +
        esac
 +
;;
 +
    edited)
 +
echo "Edited recording $2"
 +
 
 +
############
 +
# sharemarks
 +
############
 +
case $SHAREMARKS in
 +
      2) marks2pts --non-interactive --upload $1 "$2"
 +
;;
 +
esac
 +
 
 +
############
 +
# AutoCutter
 +
############
 +
case $AUTOCUTTER in
 +
      2) $ACBINDIR/autocutter-edited.sh $* >>$AUTOCUTLOG 2>&1 &
 +
;;
 +
esac
 +
 
 +
;;
 +
    *)
 +
echo "ERROR: unknown state: $1"
 
;;
 
;;
 
esac
 
esac
 +
 +
exit $?
 
</pre>
 
</pre>
 +
}}
 +
 +
==Quellen==
 +
* ''INSTALL'' (VDR)
 +
* ''rwrapper.sh'' [[sharemarks]]
 +
* ''scripts'' von [[noad]]
  
−
[[Kategorie:Scripts]]
+
[[Kategorie:Skripte]]

Aktuelle Version vom 22. Oktober 2007, 20:36 Uhr

Vorschlag für ein einfaches Wrapper-Skript, welches vor / nach / editieren einer Aufnahme ausgeführt werden kann.

[Bearbeiten] Übergabe

-r $PATH/rwrapper.sh
--record=$PATH/rwrapper.sh

Siehe auch VDR Optionen.

[Bearbeiten] rwrapper.sh

Datei
$PATH/rwrapper.sh 
#!/bin/sh
#
# rwrapper.sh
#
# an example script for use with the '-r' option could look like this:

CLIPINC="0"     # (0=off,1=on)
NOAD="0"        # (0=off,1=on,2=online mode)
SHAREMARKS="0"  # (0=off,1=on,2=upload after cut)
AUTOCUTTER="0"  # (0=off,1=on,2=manual edit)

# set the noad online-mode here
# 1 means online for live-recording only
# 2 means online for every recording
ONLINEMODE="--online=1"

# set additional noad args for every call here here (not used by AutoCutter, see README)
ADDOPTS="--ac3 --overlap --jumplogo --comments --statisticfile=/var/log/noadstat"

# AutoCutter Options - see AutoCutter README/INSTALL for more
ACBINDIR=/usr/local/vdr/bin
NOADQ=/var/spool/vdrconvert/noad
AUTOCUTLOG=/var/log/autocutter.log

case $1 in
     before)
	echo "Before recording $2"

	############
	# clipinc
	############
	case $CLIPINC in
	     1) vdrrecinfo.pl $1 "$2"
		;;
	esac

	############
	# noad
	############
	case $NOAD in
	     2) noad $1 $ADDOPTS $ONLINEMODE "$2"
		;;
	esac

	;;
     after)
	echo "After recording $2"

        ############
        # noad
        ############
        case $NOAD in
             1) noad $1 $ADDOPTS "$2"
                ;;
             2) noad $1 $ADDOPTS $ONLINEMODE "$2"
                ;;
        esac

        ############
        # AutoCutter
        ############
        case $AUTOCUTTER in
             1|2) grep -q "$2" $NOADQ 2>/dev/null
                 if [ $? -ne 0 ]; then
                   printf "%s " "$2" >>$NOADQ
                   # Start NoAD Scan in 7 min.
                   echo "printf '\n' >>$NOADQ" | at now+7 min
                 fi
               ;;
        esac
	;;
     edited)
	echo "Edited recording $2"

	############
	# sharemarks
	############
	case $SHAREMARKS in
	      2) marks2pts --non-interactive --upload $1 "$2"
		;;
	esac

	############
	# AutoCutter
	############
	case $AUTOCUTTER in
	      2) $ACBINDIR/autocutter-edited.sh $* >>$AUTOCUTLOG 2>&1 &
		;;
	esac

	;;
     *)
	echo "ERROR: unknown state: $1"
	;;
esac

exit $?


[Bearbeiten] Quellen

Von „http://www.vdr-wiki.de/wiki/index.php?title=Rwrapper.sh&oldid=47401“